TASCAM SERIES 8P DYNA 8-Channel Mic Pream, Analogue Compressor TASCAM SERIES 8P DYNA 8-Channel Mic Pream, Analogue Compressor TASCAM SERIES 8P DYNA 8-Channel Mic Pream, Analogue Compressor TASCAM SERIES 8P DYNA 8-Channel Mic Pream, Analogue Compressor TASCAM SERIES 8P DYNA 8-Channel Mic Pream, Analogue Compressor TASCAM SERIES 8P DYNA 8-Channel Mic Pream, Analogue Compressor

TASCAM SERIES 8P DYNA

8-Channel Mic Pream, Analogue Compressor

Varenr: 121190
-+
1 På lager
BeskrivelseTeknisk infoAlternativerRESSURSER
Beskrivelse

Tascam Series 8P DYNA

8-Channel Mic Preamp With Analogue Compressor, analog and optical S/MUX Outs

Tascam has long been known for transparent, natural, ultra-low-noise preamps, and the eight excellent Tascam HDIA (High Definition Instrumentation Architecture) preamplifier circuits in the SERIES 8p Dyna are its best preamps yet: The noise level (EIN) is at –127 dBu, the THD is 0.0007%, the dynamic range is 116 dB, and the crosstalk attenuation is 119 dB. An easy-to-use, single-control analogue compressor with true bypass on each channel handles hot input signals and creates smooth audio input.

 

Features at a glance

  • Eight-channel microphone preamp with eight analogue outputs and multi-channel optical outputs
  • Can be used as a standalone analogue mic preamp to expand any mixer or recording device
  • Ideal to add studio-ready audio inputs to a Tascam SERIES 102i/208i or US-20x20 via a single cable
  • Two S/MUX optical ports can output all eight channels up to a sampling rate of 96 kHz
    • 8 outputs at 44.1/48 kHz
    • 8 outputs at 88.2/96 kHz
    • 4 outputs at 176.4/192 kHz
  • Tascam HDIA mic preamps use instrumentation amplifiers and have outstanding specifications, enabling them to provide clear, natural sound with super-low noise
  • Eight balanced XLR/TRS combo input jacks
  • Channels 1–2 on the front can be used for guitars, basses and other instruments with high-impedance output
  • 48V phantom power can be provided to each input channel independently
  • Each input channel has its own single-knob analogue compressor with true bypass
  • 25-pin D-sub and eight separate TRS analogue balanced outputs support a variety of connections with other analogue equipment
  • Indicators for analogue overload, compressor and digital signals as well as level meters on the front panel
  • Wordclock input and output (with THRU switch) for flexible audio clock synchronisation with other equipment
  • AC adapter included (Tascam PS-P1230, with four exchangeable plug inserts)

Options

  • BO-16DX/OUT can be used to provide 16 XLR balanced outputs (for up to two SERIES 8p Dyna units)

Teknisk info

Produktinformasjon

- Funksjon & bruk 19" rack
- Tilkoblinger (Pluggtype HW)
  • Jack
  • ADAT optisk


Alternativer
RESSURSER