Focal viser en ny, treveis studiomonitor som låner mange elementer fra storebror SM9. Designet tilbyr både vertikal og horisontal plassering, og en snorrett frekvensgjengivelse fra 36Hz til 40kHz. Utrolig dynamisk gjengivelse. I tillegg kan den fungere både som en to-veis og en tre-veis løsning. Focal Trio 6 er en av markedets mest imponerende studiomonitorer - uansett prisklasse, og dette er et vanvittig godt verktøy for alle som jobber med lydproduksjon, miksing eller mastering.
To monitorer i en, med fjernstyring.
450 watt / 35Hz til 40kHz
Stor dynamikk uten kompresjon gir linjæritet og stort arbeidsområde
Nøytral og forvregningsfri lyd
Roterende baffel: muligjør horisontal og vertikal plassering
Kraftig SPL takler alle musikktyper (115dB peak @ 1m)
FOCUS mode (to- eller tre-veis konfigurasjon)
Double-duty Reference Monitor
The Focal Trio6 Be offers a number of benefits that may not be apparent
at first glance. A 3-way design with a 1? tweeter, a 5? woofer, and an
8? subwoofer, the Trio6 Be delivers stunningly accurate reproduction of
the audio spectrum from 35Hz to 40kHz (+/- 3dB), resolving even the most
minute details. Its circular midrange-tweeter housing may be rotated
for either horizontal or vertical orientation. But here’s where it gets
really interesting: in Focus mode (which you can trigger remotely), the
Trio6 Be operates as a two-way speaker, employing only the 5? driver and
the tweeter and limiting frequencies to between 90Hz and 20kHz – ideal
for checking the quality of your mix on playback systems with limited
frequency response.
It’s also a 2-way reference
As a two-way monitor, the Focal Trio6 Be employs only its 5? woofer and
tweeter, and limits frequencies to between 90Hz and 20kHz. This
configuration gives you the ideal compromise when checking the quality
of your mix for playback systems with limited frequency response, such
as televisions, computers, car radios, or portable speaker systems.
Albeit less extended, the frequency response curve of the two-way
configuration is identical to the Trio6 Be’s 3-way curve, giving you a
perfect instant comparison that preserves the stereo spectrum. A
footswitch (available separately) lets you toggle configurations
remotely from your listening position. Focusing on the critical middle
frequency range is an important key to a good mix that translates to the
world outside your studio.
Optimized bass response in both modes
In the Focal Trio6 Be, two front-facing bass-reflex ports ensure that
the 5? W composite sandwich cone woofer performs identically in both
2-way and 3-way modes. The 8? W composite sandwich cone subwoofer has
its own large port integrated into the front baffle. Without concerns of
rear-port saturation, front ports make it easy to position your
monitors near a wall while maintaining superior low-frequency linearity.
What’s more, the 8? sub’s large front port gives you consistent bass
performance at any SPL.
Hear the advantages of Focal’s Beryllium inverted-dome tweeter
A Focal hallmark is the inverted-dome tweeter – and it’s a big part of
the magic behind the Trio6 Be’s amazing performance. The particular
advantage of the inverted dome is that it optimizes the mechanical
coupling between the voice coil and the dome. As the voice coil is fixed
at mid-height on the dome, it can uniformly move the Trio6 Be’s entire
cone surface. This design inherently offers high efficiency, precision,
and energy, all resulting in an extremely precise soundstage. Add to
that the use of Beryllium for the Trio6 Be’s dome – a material noted for
its incredible rigidity – and you’ve got a speaker that, with
near-perfect linearity, extends all the way up to 40kHz.
W composite sandwich cone helps optimize frequency response
The Trio6 Be takes advantage of Focal’s W composite sandwich cone for
both its 5? woofer and 8? subwoofer. The unique characteristics of the
cone permit optimization of the frequency response curve, thanks to the
total control of three key parameters: lightness, rigidity, and damping.
The sound is amazingly transparent, exhibits excellent phase response,
and has extremely low distortion. Further, the 5? woofer lives in its
own isolated chamber within the cabinet; this prevents sympathetic
vibration of the other drivers while optimizing the woofer’s acoustic
performance.
Features:
- 3-way, 2-way: two monitors in one with remote switching
- Focus (2-way) mode is an ideal way to hear your mix on a bandwidth-limited reference
- Uncompromised dynamics, linearity, and wide dispersion
- Beryllium inverted dome tweeter: state-of-the-art speaker design and material
- W composite sandwich cone woofer and sub for neutral, distortion-free sound
- Rotating baffle facilitates both horizontal and vertical orientation in your studio
- LF and HF shelving, 160Hz EQ, for simplified room integration
- Bespoke tri-amplification for effortless performance:
- 8? subwoofer: 200W Class G
- 5? woofer: 150W Class G
- 1? tweeter: 100W Class AB
- High-SPL design (115dB peak @ 1m) accommodates all musical styles
- Remote pedal jack (pedal not supplied) for toggling Focus mode
- Most 1-button guitar amp footswitches are compatible