28964 28964 28964


4-way MADI Splitter, 2x BNC xSC MM/SM

Varenr: DORTR1907
Leveringstid fra fjernlager (7 dager)

Direct Out Split.Converter MUSICO MADI Format Converter
(2x optical Singe mode/multi mode<> 2x BNC) and Splitter

PLIT.CONVERTER is a combined MADI format converter and signal splitter. It allows for instantaneous conversion of optical MADI signals into coaxial signals and vice versa. Using the straightforward source selector on the front panel, each MADI output port can be fed by any input port. All ports are fully independent from each other allowing the SPLIT.CONVERTER to route and convert up to four asynchronous MADI streams simultaneously.

Two I/O configurations are available:

  • 2 x coaxial (BNC) & 2 x optical SC (single-mode or multi-mode)
  • 4 x optical SC (single-mode or multi-mode)

Bit transparent
The routing is bit transparent and works without delay. All common sample rates (up to 192 kHz) and MADI formats (48k/96k frame, 56/64 channels) are supported. This means that even proprietary adaptions of MADI (AES10) will pass through the unit in their native state.


  • Switching converter units between control rooms
  • Redundancy splitter/switch for recording or live sound applications
  • Splitter for live sound application (FoH, monitoring, recording)

Safe operation
Thanks to two phase-redundant power supplies with separate IEC inlets and AC power switches on the rear panel the device offers the highest reliability.

Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.