DU HAR IKKE LOGGET INN !



40731 40731 40731 40731 40731

Moog Werkstatt Synth byggesett m/CV

Synthesizer byggesett med CV utvidelse

Varenr: 116520
-+
8 på lager
BeskrivelseSupport
Beskrivelse
Moog Werkstatt Synthesizer med CV utvidelse byggesett
 
 
The Moog Werkstatt-01 is a patchable, 100% analog synthesizer whose design is based on classic Moog circuits. Assembly is extremely simple: Any user can quickly build this analog synthesizer with minimal tools and expertise. Through assembly and inspired investigation, the Werkstatt-Ø1 is an excellent platform for exploring the world of analog synthesizer circuits. A lifetime of experimentation, knob twisting, and sound design awaits.
 
 
OSCILLATOR SECTION
• Single VCO w/ frequency control (8Hz to 16KHz)
• Saw and square waveshapes w/ control for square pulse width
• Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control
• Ability to PWM the square wave
 
 
 
FILTER SECTION
• Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)
• Select between the Envelope generator and LFO as Mod Source.
• Polarity switch (+/-) and amount knob for control of filter cutoff modulation
 
LFO SECTION
• Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)
 
VCA/AMP SECTION
• Select between the Envelope Generator or ON (Drone)
 
ENVELOPES SECTION
• Controls for Attack & Decay time w/ Sustain On/Off switch
 
 
KB SECTION
• One octave low-note priority legato keyboard w/ glide control
 
Patchbay
• VCA Input0V to +5V in VCA EG Mode, +/-2.5V in VCA ON Mode
• VCF Input-5V to +5
• VCO LINEAR FM Input +/-2.5V - NOTE: this is an inverting control input
• VCO EXPONENTIAL FM Input -5V to +5V, 1V/Octave trimmable
• LFO CV Input 5V to +5V – NOTE: Negative CV slows LFO more than the panel
• VCF AUDIO InputUnbuffered/Unmixed AC coupled input to VCF
• 2x KB CV Output3V/semitone from 1 keyboard - NOTE: Attenuate for 1V/Octave
• 2x TRIG Output 5 msec pulse, 0 to +5 V signal generated from low-note priority
• 2x GATE Output0 to +5V signal generated from low-note priority
• 2x EG Output0 to +5V signal, Simple ASD or AD type Envelope Generator
• 2x LFO Output -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch
• 2x VCF Output-2V to +2 V signal for audio or CV uses
• 2x VCO Output0V to +5V VCO signal, wave selected by VCO Wave Switch
 
Rear Panel
• AUDIO Output Nominal +/-1.5V Signal
• POWER+12VDC Center Positive w/ 1.2A Wall transformer
• POWER CONSUMPTION 1.8 Watt AVG
 

WEIGHTS AND DIMENSIONS

 

·         PRODUCT ONLY:

o    Weight (lbs): 2 lbs.

o    Weight (kg) 1.2

o    Imperial (in) 6 W x 7.5 H x 12 D

o    Metric (cm) 15.2 W x 19 H x 30.5 D

·         PRODUCT IN BOX:

o    Weight (lbs) 4.25 lbs 

o    Weight (kg) 1.92

o    Imperial (in) 7 W x 8 H x 9 D

o    Metric (cm) 17.8 W x 20.3 H x 22.9 D

 

WHAT’S IN THE BOX

 

·         Werkstatt-01 Analog Synthesizer Kit 

·          Patch Cables  

o    1/8” Patch Cables, 5 qty

o    Patch Wires, 5 qty

·         CV Expander

·         Power Supply

·         Quickstart Guide

·         CV Expander Instructions

·         Instrument Catalog

·         Registration Card

 

 

 
Support
40731
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.