Audient iD4 Lydkort med ARC software

1 xKlasse A mikrofonforsterker

Varenr: ID4
-+
20+ på lager
BeskrivelseTilbehørAlternativerSupport
Beskrivelse

Audient ID4

 VIDEO

VIDEO2

MICROPHONE PREAMPLIFIER:

(measurement includes ADC signal path)

MIC GAIN: 0 to 66 dB (incl. +10 dB software boost)

LINE GAIN: -10 to 56 dB (-10dB hardwired line pad)

PHANTOM POWER: 48V ±4V @ 10mA channel (on USB!)

MIC EIN: <-126.0 dBu

CMRR: >75 dB @ 1kHz

MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital maximum)

INPUT IMPEDANCE (Mic): 2.8k O balanced

INPUT IMPEDANCE (Line): >8k O balanced

FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz @ min. gain

±1.0 dB 20Hz to 22kHz @ max. gain

CROSSTALK: <-91 dBu

THD+N @ 0dBu (1kHz): <0.0015% (-96.5 dBu)

SNR: 96 dB un-weighted, 99 dB A-weighted

XLR COMBI FEMALE: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)

1/4” TRS JACK: Tip (Hot), Ring (Cold) & Sleeve (Shield)

DUAL HEADPHONE OUTPUT:

MAXIMUM OUTPUT LEVEL: +12 dBu (0 dBFS digital maximum)

OUTPUT IMPEDANCE: <30 O unbalanced

VOLTAGE GAIN: +6 dB (optimised for loudness)

FREQUENCY RESPONSE: ±1.0dB 10Hz to Fs/2 (load dependent)

CROSSTALK: <-98 dBu @ 1kHz & 10kHz

THD+N @ -1dBFS (1kHz): <0.0012% (-98.4 dB)

DYNAMIC RANGE: 106 dB un-weighted, 108 dB A-weighted

MAXIMUM LEVEL into 30 O: +3 dBu 0.008% THD+N Power: 80mW

MAXIMUM LEVEL into 60 O: +6 dBu 0.005% THD+N Power: 80mW

MAXIMUM LEVEL into 600 O: +12 dBu 0.0025% THD+N Power: 31mW

1/4” TRS JACK: Tip (Left), Ring (Right) & Sleeve (Shield)

1/8” MINI JACK: Tip (Left), Ring (Right) & Sleeve (Shield)

Both headphone outputs can be driven simultaneously for two users

or just never worry about carrying the right jack adapter ever again!

D.I / INSTRUMENT INPUT:

(Channel 2)

D.I GAIN: -5 to 45dB (incl. +10dB software boost)

MAXIMUM INPUT LEVEL: +8 dBu (0.6% THD typical)

INPUT IMPEDANCE: >500k O unbalanced

FREQUENCY RESPONSE: ±0.1dB 20Hz to 22kHz

THD+N @ 0dBu (1kHz): <0.1% all musical 2nd and 3rd harmonic

Typically 0.05% at 0dBu

SNR: 87 dB un-weighted, 90 dB A-weighted

1/4” TS JACK: Tip (Hot) & Sleeve (Shield)

 

ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2):

(Measured sans microphone preamplifier under AES-17) 

MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital maximum)

DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS

FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist)

CROSSTALK: -100 dBu @ 1kHz & 10kHz

THD+N @ -1dBFS (1kHz): <0.001% (-100 dB)

THD+N @ -6dBFS (1kHz): <0.0011% (-99.1 dB)

DYNAMIC RANGE: 112 dB un-weighted, 114 dB A-weighted

DIGITAL TO ANALOGUE CONVERTER (DAC 1 & 2):

(Measured under AES-17 at line outputs 1 & 2)

MAXIMUM OUTPUT LEVEL: +12 dBu (0 dBFS digital maximum)

DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS

OUTPUT IMPEDANCE: <100 O

FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist)

CROSSTALK: <-104 dBu @ 1kHz & 10kHz

THD+N @ -1dBFS (1kHz): <0.0015% (-96.5 dB)

DYNAMIC RANGE: 112 dB un-weighted, 115 dB A-weighted

1/4” TRS JACK: Tip (Hot), Ring (Cold) & Sleeve (Shield)

POWER SUPPLY:

USB2.0 Bus Powered (2.5 Watts Maximum)

iD4 features our class leading converters and class-A mic pre.

We’ve optimised all circuitry so that we can supply true 48V

phantom power to a single Audient mic pre without compromise.

Your microphones will thank you when they get enough voltage!

USB2.0 HIGH SPEED:

BUS POWER: 500mA @ 5V System Limit

420mA @ 5V Maximum (with 48V)

No. of INPUT CHANNELS: 2 (2 Analogue)

No. of OUTPUT CHANNELS: 2 (2 Analogue)

DSP MIXER LATENCY: ROUND TRIP (in-to-out)

44.1kHz 1.583ms

48.0kHz 1.458ms

88.2kHz 0.792ms

96.0kHz 0.729ms

audient.com

Tilbehør
Alternativer
Support
22190
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.