ANDIAMO.AES is part of the ANDIAMO family of powerful, high-end MADI converters.
ANDIAMO.AES is a bi-directional, 64-channel AES3/MADI interface with a
built-in routing matrix. It is equipped with 2 MADI Ports and 32 AES3
I/Os and can simultaneously convert 64 channels of audio from AES3 to
MADI and vice-versa.
The device is housed in a compact 2U 19” casing for efficient use of rack space.
ANDIAMO.AES is also available in an SRC version with sample rate
converters on the first 16 AES3 inputs switchable in groups of eight
channels to handle asynchronous signals.
The device may be
operated locally or remotely via the ANDIAMO Remote software. Supported
remote methods are USB, D.O.NET, ‘MIDI over MADI’ and ‘Serial over
ANDIAMO Remote (Windows® / OS X®) offers access to the following features (and many more):
- Matrix Mode which offers free signal routing on a per-channel basis.
- 4 FS support – the device supports sample rates from 44.1 kHz up to 192 kHz to meet the highest sonic demands
- Level control – output gain/level trim for individual channels
The settings and the routing matrix are stored inside the device.
ANDIAMO.AES is equipped
with two MADI ports as standard, offering seamless port redundancy and
switchover. Both MADI ports are always active and carry the same MADI
data, except when the Extended Routing feature is deployed.
The Extended Routing feature enables both MADI I/Os to be used independently to:
- make full use of all conversion channels at higher sample rates (96 kHz)
- double the range of available MADI input channels
- create two individual MADI feeds
Three different modes offer individual handling of channel status data
via the AES and MADI ports. User bit transparency provides pass-through
of proprietary control data or access to MADI user bits at the AES
outputs for further analysis. Takeover of the complete channel status
(CUVP bits) is also possible.
The front panel provides
level control and status LEDs for real-time monitoring of signal
condition for all input and output channels.
Selectable clock sources are word
clock, AES input, MADI input or the internal clock. The current system
clock is provided at the word clock output at any time.
Thanks to two
phase-redundant power supplies with separate IEC inlets and AC power
switches on the rear panel the device offers the highest reliability.