DAD Pro | Mon Monitor Control option
The Pro | Mon Monitor Control option enables
the AX32 AD/DA Converter and digital matrix, as well as the DX32
Digital audio interface and matrix, to operate as an audio signal
processor providing high resolution signal summing and low latency
routing of monitor signals. The monitor control is managed via the
DADman 4.2 software application, which has support for the EUCON 3
control protocol, enabling full control of the monitor functionality
from the Avid S6 control surface.
|
Key features |
|
- Monitor controller with talkback, summing and folddown
- Control via EUCON 3 from Avid™ S6, S3, MC Pro and 5-MC
- Built-in matrix for flexible routing and digital insert
- Configurable for any audio format eg. mono, stereo, 5.1, 7.1, 9.1, and up-to 64 ch. multi channel
| - Pristine A/D and D/A conversion and optional mic pre
- Digital I/O via MADI, AES3, Dante™ and SDI
- Direct connection to Pro Tools HD / HDX / HD Native cards
- Fixed 7 sample latency on all signal paths and 32 bit floating point summing processing
|
DADman EUCON Control
The
complete monitor control system consist of an AX32 or DX32 converter
interface with a DADman software application running on a Windows or a
MAC computer, which is communicating via EUCON on a Gigabit Ethernet
enabling the operation of the monitor control from the Avid S6 Control
Surface.
Monitor matrix and processing The
monitor control is able to set the listening levels, Dim and
Cut of a main control room speaker set and two alternate speaker
sets. Further more four monitor sets can 
|
be
controlled with level and cut. The signal output configuration
of each speaker and monitor set can be configured to any format: mono,
stereo, 5.1, 7.1, 9.1, and multi channel up to 64 channels, using
any of the audio outputs of the NTP/DAD converter interface in
any combination. The sources for monitoring can be selected from
any of configured signal sources. Sources can be selected to an
monitor output as switched or more sources can be summed to a
control room speaker or monitor output providing Stem summing
functionality. As for the outputs source inputs can be configured
to any format with any combination of audio inputs of the NTP/DAD
converter interface. Talk back
functionality is available for any of the control room speaker
and monitor outputs, and the talk back can activate Cut or Dim on any
output as well. On each of the control room
speaker and monitor outputs a Folddown function can be
applied. The Folddown can comprise of any of the 7 formats:
Mono, Stereo, Left-Center-Right, Left-Center-Right-Sub, 5.1, 7.1 and
9.1 surround formats. On both the sources and the speaker and
monitor outputs. |