Dynaudio Professional BM12 mkIII Nearfeld Precision Monitor
The BM12 mkIII expands on the legacy of the classic BM12A design. Re-voiced around Dynaudio’s next generation waveguide, the BM12 mkIII has been designed around highly efficient hand-crafted neodymium drivers, providing faithful transient response and an SPL of 123 dB for larger listening environments
• Extended excursion 8” woofer with pure aluminum voice coil.
• 1.1” soft dome tweeter with pure aluminum voice coil.
• 100W LF and 50W HF Class AB amplifier.
• Bundled with IsoAcoustics ISO-L8R200 speaker stand for decoupling and proper angling.
• Optional TC Electronic Level Pilot or BMC-2 for precision level control
• Made in Denmark
Features
• 123dB SPL peak power output.
• Frequency response of 38Hz-21kHz .
• Extended bass with BM14S II precision subwoofer.
• HF, MF, LF analog room filters allow flexible positioning.
• High pass filters at 60/80Hz for perfect subwoofer adaption.
• Input sensitivity switch (-10/+4dB range).
Tech Spec
System Two-way Active Nearfield Monitor
Frequency Response: (+/- 3 dB) 38Hz - 21kHz
Input level for 85 dB SPL @1m -14dBu RMS @ 0dB setting
Input Impedance: 65kOhm each branch
Power consumption: Idle: 15W, Max: 130W
Amplifier power: Tweeter: 50W, Woofer: 100W
Bass Principle Bass reflex
Vent tuning frequency: 40Hz
Internal Cabinet Volume: 13.6 litres
Crossover Frequency: 1500Hz
Crossover Slope: 6dB/oct
Tweeter:
Esotec 28 mm/1.1” soft dome
Rear chamber
Magnetic fluid
4 mm alu front
Pure alu wire voice coil
Woofer:
200 mm/8”
One-piece thermo formed polyprop cone
75 mm/3” kapton coil
Neodymium magnet
Weight: 12.5kg