Royer Labs The dBooster R-DB20

48V Signal booster og imp. buffer

Varenr: R-DB20
-+
Fjernlager ca (0 dager)
BeskrivelseTilbehørSupport
Beskrivelse

The dBooster has two gain settings, 12 dB and 20 dB, allowing you to dial in just the right amount of in-line gain for your different singers and instruments. The 20 dB setting gives loads of clean boost for recording soft instruments and singers, but when your singer is wailing or you use the dBooster on high volume instruments like electric guitar, switch it down to 12 dB to keep from overloading your preamp or digital interface. 

The dBooster’s Class A input stage delivers crystal clean gain with virtually no noise or self-distortion.

The dBooster’s low-impedance output keeps things clean in the studio and also shines on live stages, driving long cable lengths and difficult loads like mic splitters and vintage-style preamps with no loss of gain, no increased distortion, and excellent headroom.

The dBooster gives excellent results with Royer R-121s, R-10s and stereo SF-12s. It also smokes on SM7s and other dynamic mics!

The dBooster is built in the USA and ships from our Burbank headquarters.

  • Switchable 12dB/20dB gain
  • Ultra-low noise, ultra-low distortion
  • Class A input stage
  • Safe for use on all ribbon mics
  • Wide frequency bandwidth
  • Retains sound quality on long cable runs
  • Maintains headroom and gain regardless of load
Tilbehør
Support
33765
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.