Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
Handlevogn
Handlevognen er tom.
DirectOut SPLIT.CONVERTER MADI Converter
2x optical & 2x BNC
|
10 995,-
ink. mva.
8 796,-
eks. mva.
|
|
|
Eller betale fra
418
kr /mnd. med Klarna konto
|
|
|
|
Direct Out Split.Converter MADI Format Converter (2x optical / 2x BNC) and Splitter
The SPLIT.CONVERTER is a combined MADI format converter and signal splitter. It allows for both conversion of optical MADI signals into coaxial signals and vice-versa without any delay. Using the straight-forward input selector each MADI output port can be fed by any input port. All ports are independent from each other allowing the SPLIT.CONVERTER to route and convert up to four asynchronous MADI streams at the same time.
The Routing-Matrix is bit transparent and works without delay. All common Sample Rates (up to 192 kHz) and MADI formats (48k/96k Frame, 56/64 channels) are supported and will be passed through unchanged. Thus it is possible to convert and route proprietary data formats (like Digidesign's Venue Snake) as well.
The SPLIT.CONVERTER offers highest reliability providing two phase redundant power supplies with two power inlets and switches on the rear panel.
Application
- Switching converter units between control rooms
- Redundancy splitter/switch (manually) during recording or live sound applications
- Splitting on live locations (FOH, Monitoring, Recording)
Technical Specifications
MADI Ports (Input / Output):
2 x SC-Socket multi-mode
2 x coaxial BNC, 75 Ω
Power supplies:
2 x 84 V to 264 V AC / 47 Hz to 63 Hz / safety class 1
phase redundant
Dimensions: Width 19'' (483 mm)
Height 1 HU (45 mm)
Depth 10'' (254 mm)
Weight: ca. 3 kg