Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
Handlevogn
Handlevognen er tom.
Rega Fono MC B
Moving Coil RIAA, sort
|
3 395,-
ink. mva.
2 716,-
eks. mva.
|
|
|
Eller betale fra
139
kr /mnd. med Klarna konto
|
|
|
|
Rega Fono MC
General Information
Rega sin egen platespillerforsterker for MC pick up-er. En meget god og kompakt platespillerforsterker som med god samvittighet kan brukes sammen med platespillere av høy kvalitet. Kan leveres i sort øg sølv utførelse.
RIAA Phono Preamp for MC
The Rega Fono is a high quality discrete component phono preamplifier. Two types are available for use with either MM or MC cartridges. Like the Ear, the new Fono benefits from an all new extruded aluminium case and new styling giving it more of a family feel, to match its illustrious big brothers.
The Fono simply connects to the line input on the amplifier, and the tonearm leads and earth (if used) to the input socket and earth terminal of the Fono back panel
Features
- Input sensitivity = 3mV for 200mV output
- Input loading = 47KW in parallel with 100pF
- Maximum input level = 100mV
- Minimum output load impedance = 36.5 dB</font></li>
- Power requirements = 24VAC @ 110mA (Rega PS1)
- Frequency response (50KW load) = 17 Hz (-3 dB) to 100 kHz (-0.2 dB)
- RIAA accuracy (50KW load) = +/-0.2 dB 100 Hz to 100 kHz
Review from "Enjoy The Music"
The Rega Fono MC is suitable for low output moving coils (if your cartridge is a high output device, Rega also has the Fono MM). The Fono MC is a low wide black metal box (a silver finish is also available) mounted on four rubber feet with a 24-volt wall-wart power supply. On the back are four sturdy phono jacks for input and output, a ground terminal and a jack for the power supply. The front panel has a power button and the familiar 3D Rega icon. If you want to adjust the Fono to suit your cartridge, better pull out a Pozidrive screwdriver to gain access to the four DIP switches on the PCB. Two control left and right loading, and two control left and right gain. I wonder if anyone ever sets the two channels to different settings. Using the Koetsu Black Goldline, I set the gain to 300uV, the loading resistance to 100O and the capacitance to 4200pF. The circuit board is well laid out and very clearly marked, which speaks well for reliability and serviceability. The preamplifier is made in Britain, while the power supply hails from China.